Electronic Connectors

Approx. Rs 70 / PieceGet Latest Price

Product BrochureProduct Details:

An AC adapter, AC/DC adapter, or AC/DC converter^[1] is a type of external power supply, often enclosed in a case similar to an AC plug. Other common names include plug pack, plug-in adapter, adapter block, domestic mains adapter, line power adapter, wall wart, power brick, and power adapter. Adapters for battery-powered equipment may be described as chargers or rechargers (see also battery charger). AC adapters are used with electrical devices that require power but do not contain internal components to derive the required voltage and power from mains power. The internal circuitry of an external power supply is very similar to the design that would be used for a built-in or internal supply.

External power supplies are used both with equipment with no other source of power and with battery-powered equipment, where the supply, when plugged in, can sometimes charge the battery in addition to powering the equipment.

Use of an external power supply allows portability of equipment powered either by mains or battery without the added bulk of internal power components, and makes it unnecessary to produce equipment for use only with a specified power source; the same device can be powered from 120 VAC or 230 VAC mains, vehicle or aircraft battery by using a different adapter.

Features:-

• Excellent Quality
• Short Circuit, Over Voltage & Over Current Protection
• Incredibly Low Fault Rates
• No Minimum Load
• This power supply is a regulated Center Positive power supply
• It's plug design is for Indian power socket so, no plug converter is required
• Compact size & light weight
• High Reliability
• Regulated Stable Voltage
• Good quality SMPS Based Adapter
• Stabilized Output, low ripple & low interference
• Single Output Voltage
• High Efficiency & low energy consumption

Specifications:-

 

• Input - 100-240 VAC 50/60Hz  
• Category - Switch Mode Power Adaptor (SMPS)
• Output Type - DC
• Output - 12Volts 2Amp

Get the best price for Power Adapters

Approx. Rs 5 / PieceGet Latest Price

Product Details:

A D-sub contains two or more parallel rows of pins or sockets usually surrounded by a D-shaped metal shield that provides mechanical support, ensures correct orientation, and may screen against electromagnetic interference. The part containing pin contacts is called the male connector or plug, while that containing socket contacts is called the female connector or socket. The socket's shield fits tightly inside the plug's shield. Panel mounted connectors usually have threaded nuts that accept screws on the cable end connector cover that are used for locking the connectors together and offering mechanical strain relief. Occasionally the nuts may be found on a cable end connector if it is expected to connect to another cable end . When screened cables are used, the shields are connected to the overall screens of the cables. This creates an electrically continuous screen covering the whole cable and connector system.
Later D-sub connectors added extra pins to the original shell sizes, and their names follow the same pattern.

Approx. Rs 1 / PieceGet Latest Price

Product BrochureProduct Details:

Crimping Pins are available for all types of PCB Connectors like Relimate, CPU, PMC, Automotive in different Pitch
We can support this Pins in PB & Brass/Copper both

Approx. Rs 10 / PieceGet Latest Price

Product BrochureProduct Details:

We are one of the leading companies engaged in offering a wide array of RJ-11 Plug. These are precisely engineered by our highly skilled professionals using best quality material and sophisticated technology. These are widely used as telecom accessories and are well known due to their reliability.

Moreover, we also assure timely delivery of our products.

 

Features:

 

• Superior finish
• Long life
• Reliable

Approx. Rs 25 / PieceGet Latest Price

Product BrochureProduct Details:

An insulation-displacement contact (IDC), also known as insulation-piercing contact (IPC), is an electrical connector designed to be connected to the conductor(s) of an insulated cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing the need to strip the conductors of insulation before connecting. When properly made, the connector blade cold-welds to the conductor, making a theoretically reliable gas-tight connection.

Modern IDC technology developed after and was influenced by research on wire-wrap and crimp connector technology originally pioneered by Western Electric, Bell Telephone Labs, and others.Although originally designed to connect only solid (single-stranded) conductors, IDC technology was eventually extended to multiple-stranded wire as well.

Initially, IDCs were seen only in extra-low voltage applications, such as telecommunications, networking and signal connections between parts of an electronic or computer system. However, they are now also used in some domestic and industrial low voltage (power) applications, as can be seen in the illustration.^[4][5] The benefits claimed for their use in these applications include up to 50 percent faster installation, due to the reduction in the stripping, twisting and screwing down processes.

Approx. Rs 5 / PieceGet Latest Price

Product BrochureProduct Details:

We can support Bergsticks in many types such as Straight & Right-Angle with different pitches like 1.27mm, 2.54mm etc. in thru' hole & smd & also with different Height

Right Angle Connector Berg Strip for esteemed clientele. We fabricate these products in harmony with the set industry norms, so that global guiding principles of quality are preserved. Enormously cherished, acknowledged and highly praised for their seamless finish and sturdy nature, these products are highly demanded and suggested.

Approx. Rs 16 / PieceGet Latest Price

Product BrochureProduct Details:

The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 60A constant. Nylon XT60 more reliable and better quality connection than Dean T-Connectors. Nylon XT60 provides better protection from short-circuiting the batteries.

Approx. Rs 5 / PieceGet Latest Price

Product Details:

We are eminently engaged in offering an exhaustive range of PCB Connectors, which can be availed by our clients in wide variety, different designs and sizes. Our manufacturers use the best available resources and the finest quality of materials to manufacture quality oriented PCB Connectors. The materials used to manufacture these products include materials with high level of electric conductivity. This enables better connection between two different terminals and ensures high performance. These PCB Connectors are widely used across different applications in electronic and electrical industries.

Approx. Rs 0 / PieceGet Latest Price

Product Details:

We can support Machined IC Sockets from 6pin to 40pin with Gold Flash
Buy It Now8 Pin DIP IC Socket Adaptor Solder Type. These sockets have excellent conductivity and the pins are super easy to solder onto the PCB. Row to row distance:7.62mm. Pin length:2.9mm. Number of pins:8.

Approx. Rs 20 / PieceGet Latest Price

Product Details:

• Features :AC 220-250V 32A, plastic housing, 2P+E Plug Socket connector Set, anti-dust and splash proof functions.
• Used widely in the iron and steel, petrochemical industry, building, airport, mine, stope, ports, mechanical machines, video equipments, etc.
• Confirm to IEC309-2

Portable Plug Adapter with built-in plugs, No more fumbling with a jumble of confusing international power adapters. In one convenient and easy-to-use unit, this travel adapter plugs into the power outlets of more than 150 countries. Simply slide out one of the four built-in plugs and safely power laptops, cell phones, battery chargers, and other consumer electronics.

The Universal Adapter Plug allows you to plug your small appliance or comptuer into outlets around the world
* Contains 4 international plugs, UG-A: For use in Europe, Middle East, Africa, Asia, and the Caribbean. UG-B: For use in S. America, N. America
* Built in surge protector - accommodates grounded and ungrounded plugs
* This adaptor plug modifies electrical outlet, does not change the voltage, supports universal voltage 110V-240V
* This charger adapter plug converts the power outlet only, it does NOT convert electrical output current and voltage. Please make sure your device carries a electrical converter when you travel to other countries with different electrical output.

Approx. Rs 20 / PieceGet Latest Price

Product BrochureProduct Details:

USB, short for Universal Serial Bus, is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. It is currently developed by the USB Implementers Forum (USB IF).

USB was designed to standardize the connection of computer peripherals (including keyboards, pointing devices, digital cameras, printers, portable media players, disk drives and network adapters) to personal computers, both to communicate and to supply electric power. It has become commonplace on other devices, such as smartphones, PDAs and video game consoles.USB has effectively replaced a variety of earlier interfaces, such as parallel ports, as well as separate power chargers for portable devices.

Approx. Rs 200 / PieceGet Latest Price

Product BrochureProduct Details:

DEUTSCH DT connectors are designed for high-performance and reliable connections in industrial and commercial transportation applications, such as under the hood, on the chassis, and in the cab. The V0-recognized thermoplastic housing features a wide operating temperature range and resistance to UV exposure. The silicone rear wire and interface seals prevent debris and moisture ingress up to IP68 rating. The DEUTSCH DT connector family is compatible with the DEUTSCH size 16 round contact system, rated to 13A.